Toshiba PORTG R300 User Manual

To remove the USB module, follow the steps below and refer to Figure 4-29. 

1.  Remove the following screw securing the USB module. 

•  M2×4BS 

  S-THIN 

HEAD 

×1 

2.  Peel of the insulator and disconnect the USB cable from the connector USB on the 

system board. 

3.  Remove the USB module from the system board. 

 

M2

×4BS S-THIN HEAD 

Insulator 

USB module 

USB cable 

Connector USB 

To install the USB module, follow the steps below and refer to Figure 4-29 and Figure 4-30. 

1.  Secure the USB module with the following screw. 

•  M2×4BS 

  S-THIN 

HEAD 

×1 

2.  Connect to the USB cable to the connector USB on the system board. 

 

Cable guide 

LCD cable 

USB cable 

MDC cable