Toshiba PORTG R300 User Manual

To remove the MDC jack, follow the steps below and refer to Figure 4-34. 

1.  Remove the MDC jack from the base assembly. 

2.  Peel the insulator and remove the MDC cable. 

3.  Remove the MDC cable to the cable guide. 

 

Cable guide 

Insulator 

MDC cable 

MDC jack 

 

To install the MDC jack, follow the steps below and refer to Figure 4-34. 

1.  Install the MDC jack to the base assembly. 

2.  Set the MDC cable on the cable guide in place and stick the insulator.