Toshiba PORTG R300 User Manual
2 Troubleshooting Procedures
PORTEGE R300 Maintenance Manual (960-591)
[CONFIDENTIAL]
2-7
2.3 Power
Supply
Troubleshooting
The power supply controls many functions and components. To determine if the power
supply is functioning properly, start with Procedure 1 and continue with the other Procedures
as instructed. The procedures described in this section are:
supply is functioning properly, start with Procedure 1 and continue with the other Procedures
as instructed. The procedures described in this section are:
Procedure 1: Icons in the LCD Check
Procedure 2: Error Code Check
Procedure 3: Connection Check
Procedure 4: Charge Check
Procedure 5: Replacement Check
Procedure 1
Icons in the LCD Check
The following Icons in the LCD indicate the power supply status:
Battery icon
DC IN icon
The Power Supply Controller (PSC) displays the power supply status through the Battery
icon and the DC IN icon in the LCD as listed in the tables below. To check the power supply
status, install a battery pack and connect an AC adaptor.
icon and the DC IN icon in the LCD as listed in the tables below. To check the power supply
status, install a battery pack and connect an AC adaptor.
Table 2-1 Battery icon
Battery icon
Power supply status
Lights orange
Battery is charged and the external DC is input. It has no
relation with ON/OFF of the system power.
relation with ON/OFF of the system power.
Lights green
Battery is fully charged and the external DC is input. It has
no relation with ON/OFF of the system power.
no relation with ON/OFF of the system power.
Blinks orange
(even intervals)
(even intervals)
The battery level is low while the system power is ON.
Blinks orange once
(at being switched on)
(at being switched on)
The system is driven by only a battery and the battery level
is low.
is low.
Doesn’t light
Any condition other than those above.