Panasonic UF-4100 User Manual

100

When something unusual occurs, the display may show one of the Information Codes listed below. These 
will help you to identify and correct the problem.

001

Recording paper jammed when feeding from the 
Paper Tray.

Remove the jammed paper.

007

Recording paper did not completely exit out of 
machine.

Remove the Drum Unit/Toner Cartridge 
Assembly Cartridge and remove the jammed 
paper.

010

No recording paper.

Load the recording paper.

030

Document is misfeeding.

1. Reload the document properly. 
2. Remove the document jam.
3. Adjust ADF.

103
106

031

Document paper is too long or jammed.
Document length exceeds 78.8 inches (2 meters).

1. Reload the document properly. 
2. Remove the document jam.

041

Out of toner.

Replace the Toner Cartridge.

043

Toner is getting low.

044

The Life Expectancy of the Drum Unit has been 
reached.

Replace the Drum Unit.

045

Drum Unit/Toner Cartridge Assembly is not installed.

Install the Drum Unit/Toner Cartridge Assembly.

061

ADF Door is open. 

Close the ADF Door.

--

400

During initial handshake, receiving station did not 
respond or communication error occurred.

1. Check with the other party.
2. Reload the document(s) and send again.

--

402

During initial handshake, communication error 
occurred.

Reload the document(s) and send again.

--

403

No polling capability at the remote side.

Ask remote side to set "POLLED=ON".

--

404/405 During initial handshake, communication error 

occurred.

Reload the document(s) and send again.

--

407

No confirmation from the receiving station for the 
previous page sent.

Wait a few minutes and send again.

--

408/409 Remote side confirmation of previous page is illegible. Wait a few minutes and send again.

--

410

Communication aborted on the transmitting side.

Check with the other party.

--

411

Polling password does not match.

Check the polling password.

412

No data from the transmitting side.

Check with the other party.

--

414

Polling password does not match.

Check the polling password.

416/417

418

Received data has too many errors.

Check with the other party.

--

420/421 Machine goes to receiving mode, but receives no 

command from the transmitting side.

1. Remote side misdial.
2. Check with the other party.

--

422/427 Interface is incompatible.

Check with the other party.

--

433/434

459

Communication error occurred while receiving.

Check with the other party.

--

436/490 Received data has too many errors.

Check with the other party.

--