Toshiba G35 User Manual

272

5.375 x 8.375 ver 2.3

When RAID-0 is configured, the total hard disk capacity will 
appear to the operating system as twice that of the smaller of 
the two hard drives in the RAID configuration. For example, 
when a RAID-0 array is configured with one 40GB hard disk 
and one 60GB hard disk, the computer’s total hard disk will 
appear to the operating system as 80GB  - 40GB + 40GB (NOT 
40GB + 60GB). You cannot use the remaining 20GB on the 
larger hard disk drive.

When RAID-1 is configured, the computer’s total hard disk 
capacity will appear to the operating system as the smaller of 
the two hard disk drives used. For example, when RAID-1 is 
configured with one 40GB hard disk drive and one 80GB hard 
disk drive, the computer’s total hard disk capacity will appear 
as only 40GB to the operating system.

❖

Date of last media check—Date and time when a media 
check was completed. Displays the most recent date that 
a media check or array rebuild occurred. 

❖

Assigned local drive—Local drive letter assigned to the 
array.

To view the status of a hard disk drive:

Start the TOSHIBA RAID Console utility by clicking Start, 
All Programs. Then select TOSHIBA, RAID, RAID 
Console.

Double-click the hard disk icon.

The Hard disk drive information window appears.

NOTE