Acer Extensa 500 User Manual
Error Messages
102
User’s Guide
Insert system diskette
and press <Enter> key
to reboot
and press <Enter> key
to reboot
Insert a system (bootable) diskette in
the floppy drive (A:), then press Enter
to reboot.
the floppy drive (A:), then press Enter
to reboot.
Keyboard Error or No
Keyboard Connected
Keyboard Connected
Contact your dealer or an authorized
service center.
service center.
Keyboard Interface
Error
Error
Contact your dealer or an authorized
service center.
service center.
Memory Size Mismatch
Press F2 (during POST) to enter the
Setup Utility; then press Esc to exit and
reconfigure the computer.
Setup Utility; then press Esc to exit and
reconfigure the computer.
Missing operating
system
system
Follow these steps:
1. Press F2 (during POST) to enter the
Setup Utility.
2. Enter the Hard Disk 0 submenu and
correct the Hard Disk 0 type. See
the specification label attached to
hard disk drive. We suggest you set
the Hard Disk 0 type to [Auto] for
hard disk drive auto-detection.
the specification label attached to
hard disk drive. We suggest you set
the Hard Disk 0 type to [Auto] for
hard disk drive auto-detection.
3. Exit the Setup Utility (saving the
changes).
Non-system disk or disk
error. Replace and
strike any key when
ready
error. Replace and
strike any key when
ready
Insert a system (bootable) diskette in
the floppy drive (A:), then press Enter
to reboot.
the floppy drive (A:), then press Enter
to reboot.
Pointing Device Error
Contact your dealer or an authorized
service center.
service center.
Pointing Device
Interface Error
Interface Error
Contact your dealer or an authorized
service center.
service center.
Protected Mode Test
Fail
Fail
Contact your dealer or an authorized
service center.
service center.
Error Messages
Corrective Action
500-e.book : 500-6e.fm Page 102 Monday, August 17, 1998 9:36 PM