ZyXEL Communications IES-612-51A User Manual
Chapter 41 Commands Summary
IES-612-51A User’s Guide
259
snmp getcommunity
<community>
Sets the SNMP GetRequest
community.
community.
H/H
snmp setcommunity
<community>
Sets the SNMP SetRequest
community.
community.
H/H
snmp trapcommunity
<community>
Sets the SNMP Trap community.
H/H
snmp trusthost
<ip>
Sets the SNMP trusted host. Set
0.0.0.0 to trust all hosts.
0.0.0.0 to trust all hosts.
H/H
snmp trapdst set
<index> <ip>
[<port>]
Sets the SNMP trap server and
listening port. Set 0.0.0.0 to not
send any SNMP traps.
listening port. Set 0.0.0.0 to not
send any SNMP traps.
H/H
snmp trapdst del
<index>
Deletes the SNMP trap server
H/H
server show
Displays the device’s service
status and port numbers.
status and port numbers.
M/L
server enable
<telnet|ftp|web|ic
mp>
Turns on a service.
H/H
server disable
<telnet|ftp|web|ic
mp>
Turns off a service.
H/H
server port
<telnet|ftp|web>
<port>
Sets a port for a service.
H/H
client show
Displays the device’s secured
client settings.
client settings.
M/L
client enable
<index>
Turns on a secure client.
H/H
client disable
<index>
Turns off a secure client.
H/H
client set
<index> <start ip>
<end ip> [[telnet]
[ftp] [web]
[icmp]]
Sets a secured client set: a range
of IP addresses from which you
can manage the device and the
protocols that can be used.
of IP addresses from which you
can manage the device and the
protocols that can be used.
H/H
syslog show
Displays the syslog settings.
M/L
syslog enable
Turns on the syslog logging.
H/H
syslog disable
Turns off the syslog logging.
H/H
syslog server
<ip>
Sets the IP address of the syslog
server.
server.
H/H
x
stdio show
Displays Current Stdio Timeout.
L/L
stdio set
<minute|0:no
timeout>
Sets Current Stdio Timeout.
H/H
time show
Displays the system’s current
time.
time.
L/L
time set
<hh> [<mm> [ss]]
Sets the system’s time.
H/H
date show
Displays the system’s current
date.
date.
L/L
date set
<yyyy mm dd>
Sets the system’s date.
H/H
timeserver show
Displays the system’s time server.
M/L
timeserver set
<none>
Sets the system to not use a time
server.
server.
H/H
Table 88 Commands (continued)
CLASS
COMMAND
PARAMETERS
DESCRIPTION
P