ZyXEL Communications IES-612-51A User Manual

 Chapter 47 IGMP Commands

IES-612-51A User’s Guide

where

This command sets the default bandwidth for multicast channels for which you have not 
configured bandwidth requirements yet. Multicast bandwidth settings on channels (using the 

switch igmpsnoop bandwidth set

 command) have higher priority over this default 

setting.

Syntax:

  ras> switch igmpsnoop bandwidth set <index> <start-mcast-ip> <end-mcast-ip> 

<bandwidth>

where

This command configures bandwidth allocation for the multicast channel(s). For multicast 
channel(s) for which you have not configured bandwidth settings, the default multicast 
bandwidth setting applies (see the 

switch igmpsnoop bandwidth default

 command). 

Syntax:

  ras> switch igmpsnoop bandwidth delete <index>

where

This command removes the specified multicast bandwidth configuration profile. 

Use the IGMP bandwidth port commands to set up bandwidth budgets for multicast traffic on 
specific ports.

<bandwidth>

=

Allowed bandwidth between 1 and 1000 000 kbps (kilo bits 
per second).

<index>

=

1..96; a unique number for this setting.

<start-mcast-

ip>

=

224.0.0.0..239.255.255.255; the beginning of the multicast 
range.

<end-mcast-ip>

=

224.0.0.0..239.255.255.255; the end of the multicast range. 
It must be greater than <start-mcast-ip>.

<bandwidth>

=

1..100000, in units of kbps

<index>

=

1..96; a unique number for this setting.