ZyXEL Communications IES-612-51A User Manual
Chapter 53 Virtual Channel Management Commands
IES-612-51A User’s Guide
378
where
This command allows you to display the PVC parameters of the specified DSL port(s) or all of
the DSL ports if you do not specify any.
the DSL ports if you do not specify any.
53.3.2 PVC Set Command
Syntax:
ras> adsl pvc set <portlist> <vpi> <vci> <super |vid = 1..4094 <priority>>
<DS vcprofile[,US vcprofile]>
where
<portlist>
=
You can specify a single DSL port <1>, all DSL ports <*>
or a list of DSL ports <1,3,5>. You can also include a range
of ports <1,5,6~10>.
or a list of DSL ports <1,3,5>. You can also include a range
of ports <1,5,6~10>.
[<vpi> <vci>]
=
The VPI and VCI of an individual PVC.
<portlist>
=
You can specify a single DSL port <1>, all DSL ports <*>
or a list of DSL ports <1,3,5>. You can also include a range
of ports <1,5,6~10>.
or a list of DSL ports <1,3,5>. You can also include a range
of ports <1,5,6~10>.
<vpi>
=
The VPI setting can be 0 to 255.
<vci>
=
The VCI setting can be 32 to 65535 if the vpi is 0 or 1 to
65535 if the vpi is not 0.
65535 if the vpi is not 0.
<super |vid
=
Enable the super channel option to allow a channel forward
frames belonging to multiple VLAN groups (that are not
assigned to other channels). The IES-612-51A forwards
frames belonging to VLAN groups that are not assigned to
specific channels to the super channel. The super channel
functions in the same way as the channel in a single channel
environment. One port can have only one super channel.
frames belonging to multiple VLAN groups (that are not
assigned to other channels). The IES-612-51A forwards
frames belonging to VLAN groups that are not assigned to
specific channels to the super channel. The super channel
functions in the same way as the channel in a single channel
environment. One port can have only one super channel.
The default VID (1 to 4094). Each PVC must have a unique
VID since the IES-612-51A forwards traffic back to the
subscribers based on the VLAN ID.
VID since the IES-612-51A forwards traffic back to the
subscribers based on the VLAN ID.
You must assign a default VID (1 to 4094) and IEEE 802.1p
default priority (0 to 7) to normal channels. Each PVC must
have a unique VID (since the IES-612-51A forwards traffic
back to the subscribers based on the VLAN ID).
default priority (0 to 7) to normal channels. Each PVC must
have a unique VID (since the IES-612-51A forwards traffic
back to the subscribers based on the VLAN ID).
<priority>
=
This is the priority value (0 to 7) to add to incoming frames
without a (IEEE 802.1p) priority tag.
without a (IEEE 802.1p) priority tag.
DS vcprofile
=
Assign a VC profile to use for this channel’s downstream
traffic shaping.
traffic shaping.
[,US
vcprofile]>
=
Assign a VC profile to use for policing this channel’s
upstream traffic. The IES-612-51A does not perform
upstream traffic policing if you do not specify an upstream
VC profile.
upstream traffic. The IES-612-51A does not perform
upstream traffic policing if you do not specify an upstream
VC profile.