Transcend Information TS-USP3 User Manual

 1.  Suspend Mode

 2.  HDD Power Down

There are three selections for Power Management.  Two of them have fixed mode settings.

 1.  Min. Power Saving:

  Minimum power management mode.  Inactivity period is defined below:

Suspend Mode = 1 hr.

HDD Power Down = 15 min.

 2.  Max. Power Saving:

  Maximum power management mode. Inactivity period is defined below:

Suspend Mode = 1 min.

HDD Power Down = 1 min.

 3. User Define:

 Allows you to set each mode individually.  Select the time-out period for each mode

 shown above.

•     

     Defines the Video Off features.

      -Blank Screen:

Only blanks the screen.  Use this for monitors without power management and “green”

features.

      -V/H SYNC+BLANK:

Blanks the screen and turns off vertical and horizontal scanning.

      -DPMS:

The DPMS (Display Power Management System) feature allows the BIOS to control the

video display card if it supports the DPMS feature.

•     

     

This determines the manner in which the monitor is blanked.  Select “Yes” to blank the

      monitor when the system enters suspend mode.

•     

     Select Suspend Type:“Stop Grant” or “PWR ON Suspend”.

•     

     You can select one of the following interrupt resources for modem use:  “N/A”, “3”, “4”,

     “5”, “7”, “9”, “10”, and “11”.