Sony CPD-E500E User Manual

6

Before using your monitor, check that the following accessories 
are included in your carton:
• Power cord (1)
• HD15 video signal cable (1)
• Macintosh G3 adapter (for blue and white system) (1)
• Setup Disk (1)
• Warranty card (1)
• Notes on cleaning the screen’s surface (1)
• This instruction manual (1)

Turn off the monitor and computer before connecting.

• Do not touch the pins of the video signal cable connector as this might 

bend the pins.

• When connecting the video signal cable, check the alignment of the 

HD15 connector. Do not force the connector in the wrong way or the 
pins might bend.

x

x

x

x

x

x

x

x

* Connect the supplied Macintosh G3 adapter to the computer before 

connecting the cable. This adapter is compatible with the Power 
Macintosh G3 computer that has three rows of pins. If you are 
connecting to the other version of Power Macintosh G3 series computer 
with two rows of pins or other models, you will need a different adapter 
(sold separately).

With the monitor and computer switched off, first connect the 
power cord to the monitor, then connect it to a power outlet.

(HD15)

HD15 video signal 
cable (supplied)

to video output

IBM PC/AT or compatible 
computer

to HD15

(HD15)

Use the supplied Macintosh G3 adapter (for blue and white 
system).

to HD15

Macintosh G3 adapter 
(for blue and white 
system) (supplied)

*

Power Macintosh G3

to video 
output

HD15 video signal 
cable (supplied)

(HD15)

to AC IN

to a power outlet

power cord (supplied)