Sirius Satellite Radio 6.1ch Sirius-Ready A/V Surround Receiver User Manual
23
To display the signal strength, press OSD once.
Connect the SIRIUS home tuner to your receiver using the 8-pin mini DIN
cable. Your receiver provides the power to the SIRIUS home tuner through
the 8-pin mini DIN cable. You do not need to connect the AC adapter to the
Sirius home tuner. However, we recommend using the AC adapter for less
noise.
cable. Your receiver provides the power to the SIRIUS home tuner through
the 8-pin mini DIN cable. You do not need to connect the AC adapter to the
Sirius home tuner. However, we recommend using the AC adapter for less
noise.
You can use the OPTICAL IN jack to connect an optical cable (not supplied)
to receive audio signals from the SIRIUS home tuner. When you use the
optical cable, leave the 8-pin mini DIN cable connected and set the input
mode to digital by pressing ANALOG/DIGITAL SELECT.
to receive audio signals from the SIRIUS home tuner. When you use the
optical cable, leave the 8-pin mini DIN cable connected and set the input
mode to digital by pressing ANALOG/DIGITAL SELECT.
Notes:
• The SIRIUS OPTICAL IN jack is only for the SIRIUS home tuner.
• Before making or changing the connections, switch off the power
and disconnect the power cord from the power outlet. Plugging
in components should be the last connection you make with
your system.
in components should be the last connection you make with
your system.
• Do not allow any contact between speaker wires from diff erent
terminals.
AC Power Cord
Be sure to connect the power cord to an AC outlet that supplies the correct
voltage.
voltage.
Hold the power plug when plugging or unplugging the power cord.