Marantz R3001 User Manual

This feature (Sound Injection) combines a sound 
from one source with a picture from another.
Choose the video source fi rst, and then choose a 
different audio source to activate this function.

r  S.(Surround) SPEAKER B button

Press this button to activate the Surround Speaker B 
system . “SPKR B” indicator will be illuminated in the 
display. (See page 33)

t  INFRARED receiving sensor 

This window receives infrared signals for the remote 
control.

y  SURROUND MODE button

You can select the surround mode by pressing this 
button.

u  PURE DIRECT button

When this button is pressed, the tone control circuitry is 
bypassed as well as Bass Management.
DIRECT indicator will be illuminated in the display.

!5

!6

!7

!8

!9

@0

@1

@2

q w

y u

!3

i

o !0

t

!2

!1

r

e

!4

q  POWER switch and STANDBY 

Press the button to turn the power ON, and press again 
to turn it OFF. If the POWER switch is in the ON position, 
the power of this unit can be turned ON/OFF by pressing 
the POWER button on the remote control unit.
When this unit is in the standby mode with the 
POWER  switch set to the ON position, pressing the 
ENTER button also allows to turn the power on.
The STANDBY indicator lights up when this unit is the 
standby mode (power OFF) by the remote control unit.

w  7.1CH INPUT button

Press this button to select the output of an external 
multichannel player.

e  INPUT SELECTOR knob 

This knob is used to select the input sources.
The video function selector, such as TV, DVD, VCR1 
and DSS, selects video and audio simultaneously.
Audio function sources such as CD, TAPE, CDR/MD, 
and TUNER may be selected in conjunction with a 
Video source.

•  The surround mode is automatically switched to 

AUTO when the pure direct function is turned on.

• Additionally, Speaker Configurations are fixed 

automatically as follows.

  Front SPKR = Large, Center SPKR = Large, 

  Surround SPKR = Large, Sub woofer = On

•  This function is unavailable when the surround 

speaker B system is activated. While this function 
is  activated, this function will be canceled if the S. 
SPEAKER B button is pressed. 

i  SIMPLE SETUP button

Press this button to enter the simple setup mode.
You can setup the speaker conditions (speaker 
sizes, number of speakers, speaker delay times) 
quickly by pressing the cursor buttons.

o DISPLAY 

When this button is pressed, the FL display mode 
is changed as Surround Mode → Auto-display Off 
→ Display Off → Input Function  and the display off 
indicator(DISP) lights up in condition of DISPLAY 
OFF.

!0 MEMORY 

Press this button to enter the tuner preset memory 
numbers or station names. (See page 30)

!1 CLEAR 

Press this button to cancel the station-memory setting 
mode or preset scan tuning. (See page 31)

!2  VOLUME control knob

Adjusts the overall sound level. Turning the control 
clockwise increases the sound level.

!3  ATT (Attenuate) button

If the selected analog audio input signal is greater 
than the capable level of internal processing, the  
PEAK indicator will illuminate. If this happens, you 
should press the ATT button. “ATT” is displayed 
when this function is activated.
The signal-input level is reduced by about half. 
Attenuation will not work with the output signal of 
“REC OUT” (TAPE, CD-R/MD, VCR1 and VCR2 
output). This function is memorized for each input 
function.

!4 MUTE 

Press this button to mute the output to the speakers. 
Press it again to return to the previous volume level.

!5 T-MODE 

Press this button to select the auto stereo mode or 
mono mode when the FM band is selected. 
The “AUTO” indicator lights in the auto stereo mode. 
(See page 30)

!6 BAND 

Press this button to switch between FM and AM in 
the TUNER mode.

!7 EXIT 

This button is used to exit from the SETUP MAIN 
MENU.

!8 Cursor 

1, 2, 3, 4) / ENTER button

Use these buttons when operating the SETUP MAIN 
MENU and TUNER function.

!9 MENU 

This button is used to enter the SETUP MAIN MANU.

@0 HT-EQ 

Used to turn on or off HT(Home Theater)-EQ mode. 
This mode compensates for the audio portion of a 
movie sounding “bright”. When this button is pressed, 
“EQ” indicator lights up.

@1  AUTO (Auto surround) button

Press this button to select the AUTO mode from the 
surround modes. When this mode is selected, the 
receiver determines the surround mode corresponding to 
a digital input signal automatically.