Pioneer VSX-43TX User Manual

The following instructions show you how to play Dolby Digital or DTS sound sources with the VSX-43TX.
Before doing so be sure to complete the setup procedures described in QUICK setup in the Easy Setup Guide
Pt. 2 (starting on page 13) or Setting Up for Surround Sound (starting on page 34). This is particularly important
to achieve a surround sound effect with Dolby Digital or DTS sources.

Be sure that the STANDBY indicator
turns off on the front panel.

Choose the type of signal input with the SIGNAL
SELECT button.
See the next page for more details, if necessary.

For SURROUND modes: press MOVIE or MUSIC, use
the 

| \ buttons to select the mode you want and

press ENTER.
For STEREO/DIRECT: for press the button for that
mode.

On the front panel, use the MOVIE or MUSIC buttons
and the MULTI JOG dial. Press the button of the mode
type you want and then use the dial to cycle through
the possibilities. Press ENTER.
See “SURROUND Modes,” on  pages 44–45 for
details on which modes are available and in which
situations they are designed to be used.

−

+−

+

+