Pioneer VSX-43TX User Manual

The following steps show you how to tune in FM and AM radio broadcasts using the automatic (search) and
manual (step) tuning functions. If you already know the exact frequency of the station you want, see “Direct
Access Tuning“ on the following page.

On the remote, this selects the tuner function on the
receiver and sets the remote to the tuner operation
mode.

Each press switches the band: FM 

j AM

For Automatic Tuning
Press and hold TUNE –/+ for about one second, then
release.
The tuner starts searching the selected band and stop
automatically at the first station it locates. Repeat to
locate other stations.

For Manual Tuning
• To change frequencies one step at a time, press

TUNE –/+ repeatedly.

• To change frequencies quickly, hold down TUNE –/+

and release when you reach the frequency you
desire.

If the TUNED or STEREO indicators do not light when
tuning an FM station, because the station is too far away or
the broadcast signal is weak, press MPX on the remote
control to switch to MONO reception. This should improve
reception enough for you to enjoy the broadcast.

−

+−

+

+