Pioneer VSX-43TX User Manual

The settings here can only be done if you've performed the more basic preliminary setups. Thus, before doing
these settings do either QUICK setup (page 13) or NORMAL setup (page 36-40).
These settings are to further heighten your enjoyment of surround sound. They are not absolutely necessary but
may give more defined and enjoyable surround sound. You can decide if you want to make these settings or
not. You only need to make these settings once (unless you change the placement of your current speaker
system, add new speakers or components to your system, etc.). View these settings on the receiver display.

Use the arrow buttons (

5∞) and the ENTER button on the remote control to navigate the display on the

receiver. 

Conversely, you can use the MULTI JOG dial and ENTER button on the front panel.

5∞ buttons. Press the ENTER

5∞

5∞

In each mode the current settings are displayed
by the receiver.

This feature determines which frequencies will
be sent to the subwoofer (or large speakers).

This feature balances the sound output level of your
speakers more finely than in the NORMAL setup.

This feature adjusts the delay level of your speak-
ers more finely than in the NORMAL setup.

This feature allows you to adjust the amount of a
certain frequency in a soundtrack, acting as a
kind of room equalizer for your speakers.

Dolby Digital and DTS audio sources include
ultra-low bass tones. Set the bass peak level as
needed to prevent the ultra-low bass tones from
distorting the sound from the speakers.

This feature makes possible excellent surround
sound effects when listening to Dolby Digital and
DTS sources at low volumes.