Pioneer VSX-43TX User Manual

5∞

5∞ buttons to select

SETTING START: The MASTER VOLUME is set
to MIN (----dB), a test tone plays back and you
make the setting (go to step 3).

SETTING CANCEL: This setting won't limit the
peak level of the LFE channel.

If you selected SETTING CANCEL go to step 4.

The LFE (Low Frequency Effect) channel in Dolby Digital and DTS program sources can produce heavily
concentrated ultra-low bass tones that may exceed the capabilities of your speaker system. The following steps
show you how to set the peak level for the LFE channel. If continuing from the preceding page the BASS PEAK
LEVEL should be selected.

−

+

5∞ buttons to adjust the

If you set this level before the receiver
will have that level input but it will not appear on
this setup screen. (The screen will always open
with the level showing [- - -].)

1 Raise the level gradually.
2 Set the bass peak level at the point just before

the tone starts to distort.

If the YES or PLUS setting on the subwoofer is
selected the test tone will only play back from the
subwoofer. If not, the test tone will play back
from all speakers set to LARGE except for the
subwoofer.

The display on the receiver will show RESUME
and the MASTER VOLUME will return to its
original position.

5∞ buttons to select it)

Next, if you want, proceed to DYNAMIC RANGE
CONTROL