Yamaha RX-V2700 User Manual

k

n

Pressing n changes the character as follows: 
A to Z, 1 to 9, 0, + (plus), – (hyphen), ; (semicolon), 
/ (slash), and space. 
Pressing k changes the characters in reverse order.

h

y

Press l to move the cursor to the previous position.

“OK” appears in the display window on the remote 
control if renaming was successful.
“NG” appears in the display window on the remote 
control if renaming was unsuccessful. In this case, 
start over from step 3.

y

If you continuously want to rename another input area, press 
the input selector button, or press SELECT k / n repeatedly 
to select the component, then repeat steps 3 through 5.

“ERROR” appears in the display window on the remote control if 
you press a button not indicated in the respective step, or when 
you press more than one button simultaneously.

y

This feature is useful when you change the input or output 
assignment for digital jacks and component video input jacks. 
Refer to “Rename” on page 86.

The macro programming feature makes it possible to 
perform a series of operations with the press of a single 
button. For example, when you want to play a CD, 
normally you would turn on the components, select the 
CD input, and press the play button to start playback. The 
macro programming feature lets you perform all of these 
operations simply by pressing the CD macro button. The 
buttons listed as macro buttons below are factory set with 
macro programs. You can also program your own macros 
(see page 117).

■

• While the remote control is running a macro program, it does 

not accept any other operation until it has completed running 
the program (the transmission indicator stops flashing).

• Continue to aim the remote control at the component the macro 

is operating until the macro operation is complete.