Yamaha RX-V2700 User Manual

Page of 164
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1
To assure the finest performance, please read this manual 
carefully. Keep it in a safe place for future reference.
2
Install this sound system in a well ventilated, cool, dry, clean 
place – away from direct sunlight, heat sources, vibration, 
dust, moisture, and/or cold. Allow ventilation space of at least 
30 cm on the top, 20 cm on the left and right, and 20 cm on 
the back of this unit. 
3
Locate this unit away from other electrical appliances, motors, 
or transformers to avoid humming sounds.
4
Do not expose this unit to sudden temperature changes from 
cold to hot, and do not locate this unit in an environment with 
high humidity (i.e. a room with a humidifier) to prevent 
condensation inside this unit, which may cause an electrical 
shock, fire, damage to this unit, and/or personal injury.
5
Avoid installing this unit where foreign objects may fall onto 
this unit and/or this unit may be exposed to liquid dripping or 
splashing. On the top of this unit, do not place:
Other components, as they may cause damage and/or 
discoloration on the surface of this unit.
Burning objects (i.e. candles), as they may cause fire, 
damage to this unit, and/or personal injury.
Containers with liquid in them, as they may fall and liquid 
may cause electrical shock to the user and/or damage to 
this unit. 
6
Do not cover this unit with a newspaper, tablecloth, curtain, 
etc. in order not to obstruct heat radiation. If the temperature 
inside this unit rises, it may cause fire, damage to this unit, 
and/or personal injury.
7
Do not plug in this unit to a wall outlet until all connections 
are complete.
8
Do not operate this unit upside-down. It may overheat, 
possibly causing damage.
9
Do not use force on switches, knobs and/or cords.
10 When disconnecting the power cable from the wall outlet, 
grasp the plug; do not pull the cable.
11 Do not clean this unit with chemical solvents; this might 
damage the finish. Use a clean, dry cloth.
12 Only voltage specified on this unit must be used. Using this 
unit with a higher voltage than specified is dangerous and may 
cause fire, damage to this unit, and/or personal injury. 
YAMAHA will not be held responsible for any damage 
resulting from use of this unit with a voltage other than 
specified.
13 To prevent damage by lightning, keep the power cord and 
outdoor antennas disconnected from a wall outlet or the unit 
during a lightning storm.
14 Do not attempt to modify or fix this unit. Contact qualified 
YAMAHA service personnel when any service is needed. The 
cabinet should never be opened for any reasons.
15 When not planning to use this unit for long periods of time 
(i.e. vacation), disconnect the AC power plug from the wall 
outlet.
16 Install this unit near the AC outlet and where the AC power 
plug can be reached easily.
17 Be sure to read the “TROUBLESHOOTING” section on 
common operating errors before concluding that this unit is 
faulty.
18 Before moving this unit, press MASTER ON/OFF to release it 
outward to the OFF position to turn off this unit, the main 
room, Zone 2 and Zone 3 and then disconnect the AC power 
plug from the AC wall outlet.
19 VOLTAGE SELECTOR (Asia and General models only)
The VOLTAGE SELECTOR on the rear panel of this unit 
must be set for your local main voltage BEFORE plugging 
into the AC main supply. Voltages are as follows: 
.....................................AC 110/120/220/230–240 V, 50/60 Hz
For U.K. customers
If the socket outlets in the home are not suitable for the 
plug supplied with this appliance, it should be cut off and 
an appropriate 3 pin plug fitted. For details, refer to the 
instructions described below.
The plug severed from the mains lead must be destroyed, as a 
plug with bared flexible cord is hazardous if engaged in a live 
socket outlet.
Special Instructions for U.K. Model
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC 
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN 
OR MOISTURE.
As long as this unit is connected to the AC wall outlet, 
it is not disconnected from the AC power source even 
if you turn off this unit by MASTER ON/OFF. In this 
state, this unit is designed to consume a very small 
quantity of power.
Note
IMPORTANT
THE WIRES IN MAINS LEAD ARE COLOURED IN 
ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this 
apparatus may not correspond with the coloured 
markings identifying the terminals in your plug, 
proceed as follows:
The wire which is coloured BLUE must be connected 
to the terminal which is marked with the letter N or 
coloured BLACK. The wire which is coloured 
BROWN must be connected to the terminal which is 
marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth 
terminal of the three pin plug.
This symbol mark is according to the 
EU directive 2002/96/EC.
This symbol mark means that electrical 
and electronic equipment, at their end-
of-life, should be disposed of separately 
from your household waste.
Please act according to your local rules 
and do not dispose of your old products 
with your normal household waste.