Yamaha RX-V2700 User Manual

Some of the speakers have speaker wire connections that 
allow bi-amplification to enhance the performance of the 
speaker system. This unit allows you to make bi-
amplification connection to one speaker system. Check if 
your speakers support bi-amplification. As these speakers 
are shipped to you, you will note shorting bars or bridges, 
one connecting the two red input terminals and the other 
connecting the two black input terminals. Remove these 
shorting bars or bridges only if you plan to bi-amplify 
your speakers.

■

If you want to connect your speakers as traditional 
loudspeakers using the conventional connection method, 
connect your speakers using the regular left and right 
speaker wire connections and ignore the second set of 
terminals.

■

To make the bi-amplification connections, use the FRONT 
and SURROUND BACK terminals as shown below. To 
activate the bi-amplification connections, set “BI-AMP” 
to “ON” in “ADVANCED SETUP” (see page 127).

Remove the shorting bars or bridges to separate the LPF (low 
pass filter) and HPF (high pass filter) crossovers.