Yamaha RX-V2700 User Manual

■

This unit has more than enough power for any home use. 
However, if you want to add more power to the speaker 
output or if you want to use another amplifier, connect an 
external amplifier to the PRE OUT jacks.

• When you make connections to the PRE OUT jacks, do not 

make connections to the SPEAKERS terminals.

• The signals output at the FRONT PRE OUT and CENTER PRE 

OUT jacks are affected by the TONE CONTROL settings (see 
page 52).

• Each PRE OUT jack outputs the same channel signals as the 

corresponding SPEAKERS terminals.

• Adjust the volume level of the subwoofer with the control on 

the subwoofer (see page 53).

• Some signals may not be output at the SUBWOOFER PRE 

OUT jack depending on the settings for “Speaker Set” (see 
page 96) and “Bass Out” (see page 98).

1

Center channel output jack.

2

Front channel output jacks.

3

Surround channel output jacks.

4

Surround back or presence channel output jacks. When 
you only connect one external amplifier for the surround 
back channel, connect it to the SINGLE (SB) jack.

y

• Set the “Surround Back” to “Large x2”, “Large x1”, “Small x2” 

or “Small x1” and “Presence” to “None” (see page 97) to output 
the surround back channel signals at SURROUND BACK/
PRESENCE PRE OUT jacks.

• Set the “Presence” to “Yes” and “Surround Back” to “None” 

(see page 97) to output the presence channel signals at 
SURROUND BACK/PRESENCE PRE OUT jacks. 

5

Connect a subwoofer with a built-in amplifier.

5

4

3

2

1