Microboards Technology II User Manual

    

                                                                        Orbit II Disc-to-Disc Copier Reference Manual – Revision I

 

 

22 

 
These tests will verify that your new Orbit II has not suffered any shipping damage that affects CD-R 
handling. 
 
Accepted Disc Test: 

•  Load approximately 10 blank CD-R discs in the Input Hopper.  (Remember; Burn CD? has 

•  Press the    Yes     key at the  

 

 

 

       prompt. 

 
•  When the    

 

 

 

 prompt appears, press   No    to set the “10s” digit 

to “1”, and press   Yes    to accept the “10s” digit setting.  The underline cursor will move to the 
“1s” digit.  Press the       Yes    key to accept the “0” setting and tell Orbit II you want a ten disc 
job. 

 

•  When the CD Reader tray opens, place a short master (you can use the Orbit II distribution disc) 

in the CD Reader tray and press   Yes   . 

 
•  Orbit II will perform a simulated copy operation on the 10 discs and place them in the Accept 

Basket. 

 

• 

If all of the discs are placed in the Accept Basket, this test has been completed successfully.  
Proceed to the Rejected Disc Test.  If you experienced CD-R handling problems in this test, 
contact Microboards Technology Technical Support for assistance.

 
Rejected Disc Test: 

• 

Load approximately 10 blank CD-R discs in the Input Hopper.  

 

 

•  Press the     No     key at the  

 

 

 

 and         

 

 

    

prompts. 

 
•  Press the    Yes     key at the  

 

 

 

       prompt. 

 
•  When the    

 

 

 

 prompt appears, press   No    to set the “10s” digit 

to “1”, and press   Yes    to accept the “10s” digit setting.  The underline cursor will move to the 
“1s” digit.  Press the       Yes    key to accept the “0” setting and tell Orbit II you want a ten disc 
job. 

 
•  When the CD Reader tray opens, place a short master (you can use the Orbit II distribution disc) 

in the CD Reader tray and press   Yes   . 

 
•  Orbit II will perform a compare operation on the 10 discs.  Because they are blank it will place 

them on the Reject side of the Orbit 2. 

 

• 

If all of the discs are placed on the Reject side, this test has been completed successfully.  
Proceed to the Writer and Reader Tests that follow.  If you experienced CD-R handling problems 
in this test, contact Microboards Technology Technical Support for assistance.