Shure E4C-N-E Leaflet

Page of 2
  E4c 
 Sound Isolating Earphones 
 The E4c earphone features High-
Definition drivers with Tuned-Port 
technology for an ultra-wide frequency 
soundstage with brilliant 
highs and extended bass.  
As the ideal companion 
to any portable or home 
audio source, the E4c 
incorporates the same 
precision components 
used by professional 
musicians to bring 
incredibly accurate sound 
with remarkable isolation. 
  INSERTING THE EARPHONES 
 If the earphone seems to be lacking in low frequency response (bass), check 
the tightness of the seal between the earphone and your ear, or try one of the 
other sleeve options. 
  Warning:  Do not push the earphone sleeve beyond the ear canal opening. 
  WEARING THE EARPHONES 
 Three popular methods for wearing the earphones are illustrated below. 
  CHOOSING AN EARPHONE SLEEVE 
 Your earphones come with a selection of sleeves. Make sure the sleeve you 
use is easy to insert into your ear, fits comfortably, and is easy to remove from 
your ear. 
  CLEANING THE EARPHONE NOZZLE 
 If the nozzle of your earphone is blocked, clean the nozzle using the supplied 
wax removal loop.  
  FULL TWO YEAR WARRANTY 
 Shure Incorporated (“Shure”) hereby warrants that this product will be free 
from defects in materials and workmanship for a period of two years from 
the date of purchase. At its option Shure will repair or replace the defective 
product and promptly return it to you, or refund the purchase price. You should 
retain proof of purchase to validate the purchase date and return it with any 
warranty claim.
If you believe this product is defective within the warranty period, carefully 
repack the unit, insure it, and return it postage prepaid to: 
 Shure Incorporated
5800 W. Touhy Ave.
Niles, IL 60714-4608 
 SHURE Incorporated  http://www.shure.com
United States, Canada, Latin America, Caribbean:
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
Phone: 847-600-2000  U.S. Fax: 847-600-1212  Int’l Fax: 847-600-6446
Europe, Middle East, Africa:
Shure Europe GmbH, Phone: 49-7131-72140  Fax: 49-7131-721414
Asia, Pacific:
Shure Asia Limited, Phone: 852-2893-4290  Fax: 852-2893-4055  
 Make sure that the sleeve completely 
covers the earphone nozzle.
  If any part 
of the nozzle is exposed, the sleeve is 
not properly installed.  
 Foam Sleeves 
 When using the foam sleeves, compress the sleeve between 
your fingers before inserting it into the ear canal. Hold the 
earphone in place for about ten seconds while the foam 
expands and creates a tight seal. 
 Soft Flex Sleeves 
 In small, medium, and large sizes. Made from pliable rubber. 
 Triple-Flange Sleeves 
 If desired, the sleeve nozzle may be shortened. Use sharp 
scissors to carefully trim the nozzle to the desired length.  
 Nozzle 
 Wax Removal Loop 
Tighten the cable and take up slack by raising the cable sleeve   .  
  When cleaning, do not force any object through the earphone nozzle!  This will 
damage the earphone sound filter.
If necessary, the supplied replacement nozzles may be used. See the back of 
this guide for instructions on nozzle replacement.  
 ©2005, Shure Incorporated
27EN3189B (Rev. 4)
 Printed in U.S.A.
 Flex Sleeves 
 In small, medium, and large sizes. Made from translucent 
PVC.  
 Over the ear
in back
Over the ear
in front
Straight down
left ear
right ear