Netgear CM212 User Manual
Install the Cable Modem
After unpacking the box, you can install the cable modem. You do not have to power
down any equipment to do this, but if you need to move your computer (perhaps to get
to a port in the back), you may want to shut down the computer before moving it.
down any equipment to do this, but if you need to move your computer (perhaps to get
to a port in the back), you may want to shut down the computer before moving it.
USB Connection
Use the USB cable if you’re connecting the modem to one Windows-based computer and you
have an available USB port on your computer.
have an available USB port on your computer.
1.
Connect the CATV cable from the wall outlet to the Cable port on the modem.
2.
Connect the USB cable to the USB port on the modem and to a USB port on the computer.
3.
Connect the power adapter into the back of the modem and then plug the adapter into a
power source (such as a wall socket or power strip).
power source (such as a wall socket or power strip).
Once the Modem establishes a link with your service provider, the PC will automatically detect
the modem on the USB port.
the modem on the USB port.
The Power, Cable, Status, and USB lights on the modem should be lit. If any of the lights are
not lit, go to Troubleshooting on page 13.
not lit, go to Troubleshooting on page 13.
Note: The modem must be connected to the Coaxial Cable and established link
(Cable and Status Lights are solid Green) before your PC will recognize the modem.
(Cable and Status Lights are solid Green) before your PC will recognize the modem.
Proceed to Chapter 3 page 6 to install the USB drivers.
USB
CABLE
ETHERNET
POWER
RESET
12VDC
1.0A-1.25A
CM212 Broadband
Cable Modem
Cable Modem
2
2
4