Panasonic RR-US750 User Manual
RQT9124
16
*
Press
STOP
to stop the setting process midway.
*
The recording time cannot be set more
than 24 hours ahead of the current time.
*
Maximum recording time that can be set by Timer
recording function is 8 hours. (When only 4 hours of
memory remain, maximum recording time is 4 hours.)
*
The unit automatically turns on for preparation 30
seconds before the recording start time, then “ ” and
the Recording indicator blink. The unit does not accept
key operations for this 30 seconds. At the start time, the
recording indicator lights up and timer recording starts.
*
You can stop the recording while Timer recording is
in progress, but you cannot pause the recording.
*
Timer recording setting is cancelled once timer recording is finished.
•FOLDER/
−MENU
STOP
Recording
indicator
Timer Recording can be set to make one recording at a specified time on this unit. A recording automatically
starts at the start time and ends at the finish time.
Press and hold
•FOLDER/
−−MENU
until
the menu screen is displayed.
“
”(blinking) is displayed.
Press u, i to select “ ”
and press q/g to
enter.
1
3
Press +, – to select the start
time and press q/g to enter.
Set the finish time in the same way.
(If the recording finish time is not set,
you cannot set timer recording.)
4
Press +, – to select “ ” and
press q/g to enter.
2
• Set the time beforehand (➜ page 7).
• Select the folder for recording and recording position (➜ pages 8, 9).
• Press
STOP
to stop the unit.
ON (Start time)
OFF (Finish time)
Timer recording is cancelled if the unit is used for
playback or another operation 30 seconds before
the starting time. After setting the timer, press
STOP
to keep the unit stopped or off for standby.
Confirming the timer set:
Perform step
1
,
2
and
3
.
Cancelling Timer recording:
Select “
” in step
3
and enter.
Timer recording
“ ” is displayed after the timer recording is set.