NuTone 8210 Leaflet

Architectural & Engineering Specifications

March 2004

•

For kitchens, laundries, commercial restrooms;
anywhere you want to move a large volume of air.

• 

For kitchens up to 105 sq. ft., baths up to 196 sq. ft.,
other rooms up to 262 sq. ft.

•

Fan installs in the ceiling and ventilates directly
through the roof with round ducting.

•

Silver anodized aluminum grille installs with
a single screw.

•

Adjustable hanger bars for 16" or 24" O.C. joists.

•

Motor mounting bracket has two slots that slide over two
mounting screws on sleeve for faster installation.

•

Specially designed transition-type housing reduces
diameter of discharge opening to fit 7" round duct;
no reducer is needed.

•

Fits 9

1

⁄

8

" diameter opening in ceiling.

•

Grille extends 2" from ceiling.

•

Precision-balanced nylon blade.

•

Purchase a Washable Permanent Filter and a switch
separately from NuTone.

•

Refer to NuTone's catalog for a complete line of
accessories to effectively adapt this Ceiling Fan
to your construction requirements.

210 CFM.

6.5 Sones.

Housing: 9" diameter x 5

5

⁄

8

" deep.

Material & Finish: Housing: Galvanized steel.

Grille: 11" diameter metal, silver
anodized.

Plug-in, thermally protected.

One-piece polymeric, 5 leaf.

7" diameter.

120v, 60Hz, 0.8Amp

• Housing installs in ceiling during rough-in stage of

construction.

• Adjustable mounting brackets are furnished on the

housing. Extension-type hanger bars included for 16" or
24" O.C. joists. Motor mounts over two (2) screws located
in the housing.

• Installation Instructions are included with each unit.

Vertical Discharge Ceiling Fan shall be Model 8210 as

manufactured by NuTone according to listed specifications.
Fan shall ventilate at 210 CFM @ 0.10" S.P. and a sound
level of 6.5 Sones. Housing shall measure 9" diameter x
5

5

⁄

8

" deep and connect to 7" round duct.