Sharp LC-M3700 User Manual
55
US
Settings and
Adjustments
Auto Sync.: Start Now
Function
If “Yes” is selected and the ENTER button is pressed when applicable video is input,
the system automatically optimizes position, phase and clock using the video signal
which is currently being input.
Adjustable range
Yes/No (“No” is always the default value)
Position: H-pos. (Video/S-video/INPUT 3 COMPONENT)
Adjustable range
–10 - +10
Default
0
+ direction
Image shifts right.
– direction
Image shifts left.
Position: V-pos. (Video/S-video/INPUT 3 COMPONENT)
Adjustable range
–20 - +20
Default
0
+ direction
Image shifts up.
– direction
Image shifts down.
Fine Sync.: H-pos. (INPUT3 (RGB)/(PC (analog))
Adjustable range
0 - 180
Default
0
+ direction
Image shifts right.
– direction
Image shifts left.
Note:
No position adjustment is available when PC (digital) signal is received.
Fine Sync.: V-pos. (INPUT3 (RGB) /(PC (analog))
Adjustable range
0 - 99
Default
(Varies depending on video frequency)
+ direction
Image shifts up.
– direction
Image shifts down.
Note:
No position adjustment is available when PC (digital) signal is received.
Fine Sync.: Clock (INPUT3 (RGB) /(PC (analog))
Function
Adjusts frequency for sampling clock for applicable video.
Adjust when there is flickering in the form of vertical stripes.
Adjustable range
0 - 180
Default
90
+ direction
Clock frequency increases
– direction
Clock frequency decreases
Note:
No clock frequency adjustment is available when PC (digital) signal is received.
Fine Sync.: Phase (INPUT3 (RGB) /(PC (analog))
Function
Adjusts phase of sampling clock for applicable video.
Useful when small characters appear with low contrast and/or there are flickers at
corners.
Adjustable range
0 - 40
Default
20
+ direction
Advances clock phase
– direction
Delays clock phase
Note:
There is no clock phase adjustment for PC (digital) signals.
Settings and Adjustments (Continued)