ViPowER VP-6028 User Manual

b. When using the Docking Kit’s interface for power, set switch to the RIGHT

position. Note: it is recommended that you use the +5V /+12V power adapter
whenever possible.

6. Connect the Docking Kit’s interface cable into the appropriate interface port on

your computer; plug the other end into the connector port on the Docking Unit.

7. Viewing the screen, note that the plug-and-play feature will recognize the new

device and assign it as a new drive.

1. Unplug the interface cable from the  Docking Unit. (Note that the drive icon will

disappear from the computer screen.)

2. Turn power on Docking Unit OFF.

3. You can now switch to another device. When connecting a new device, be sure to

follow the same sequence for setup as previously outlined in section 3.0.

Printed on recycled paper.