Altec Lansing M302 User Manual
4
Getting Started
How to Install the AC Adapter
1
Connect the AC adapter cable plug
into the speaker system’s power
jack.
The jack is located on the back of the
system and labeled POWER.
into the speaker system’s power
jack.
The jack is located on the back of the
system and labeled POWER.
2
Plug the AC adapter into a wall
outlet.
outlet.
How to Install the Wireless Remote Battery
The wireless remote battery (included) is not installed at the factory. To
install the battery, follow these steps:
install the battery, follow these steps:
1
Open the battery compartment
door.
The battery compartment door is
located on the back end of the remote.
Simply slide the door in the direction of
the arrow until it clicks, and then swing
the door open.
door.
The battery compartment door is
located on the back end of the remote.
Simply slide the door in the direction of
the arrow until it clicks, and then swing
the door open.
2
Position the battery (included) so it
sits in the battery holder correctly.
Make sure the polarity (the + and
– sides of the battery) is correct as
illustrated on the inside of the door.
sits in the battery holder correctly.
Make sure the polarity (the + and
– sides of the battery) is correct as
illustrated on the inside of the door.
3
Close the battery compartment door
Swing the door shut, and then slide it in the opposite direction of the
arrow until it clicks.
Swing the door shut, and then slide it in the opposite direction of the
arrow until it clicks.
NOTE
Please discard used batteries properly.