Panasonic AJ-SD930BE User Guide
35 (E)
Setup menus
The underlined items indicates the initial setting.
USER menu
<BASIC>
No./Item
Description
000
P-ROLL TIME
This sets the preroll time.
The preroll time can be set from 0 to 15 seconds
in 1-second increments.
The preroll time can be set from 0 to 15 seconds
in 1-second increments.
0000
0s
:
:
0005
5s
:
:
0015
15s
001
LOCAL ENA
This selects the buttons which can be operated
on the front panel when the CONTROL switch
has been set to REMOTE.
on the front panel when the CONTROL switch
has been set to REMOTE.
0000
DIS :
No buttons can be operated.
0001
ST&EJ :
Only the STOP and EJECT buttons can be
operated.
operated.
0002
ENA :
AJ-SD955B: All buttons except for the
RECORDER and PLAYER
buttons can be operated.
buttons can be operated.
AJ-SD930B: All buttons can be operated.
002
TAPE TIMER
This selects the 12 or 24 hour display for the
CTL counter.
CTL counter.
0000
±12h : 12 hour display
0001
24h : 24 hour display
006
SYNCHRONIZE
SD955B
This selects whether or not to synchronize
between two VTRs.
between two VTRs.
0000
OFF :
No synchronization. The editing points deviate
several frames, but editing can be started
quickly.
several frames, but editing can be started
quickly.
0001
ON :
Synchronization. Allows for error-free editing.
003
REMAIN SEL
This selects whether the remaining tape time
and total tape length are to be displayed in the
superimposed display of the VIDEO OUT 3/
SDI OUT 3 connector signals.
and total tape length are to be displayed in the
superimposed display of the VIDEO OUT 3/
SDI OUT 3 connector signals.
0000
OFF : No display.
0001
2L :
The remaining tape time is displayed on the
second line.
second line.
0002
1L :
The remaining tape time is displayed on the
first line.
first line.
0003
R/TTL :
The remaining tape time is displayed on the
first line, and the total tape length is displayed
in the second line.
first line, and the total tape length is displayed
in the second line.
<Notes>
O
When “2L” is selected, the remaining tape time
is not displayed if “TIME” has been selected as
the setup menu item No.008 (DISPLAY SEL)
setting.
is not displayed if “TIME” has been selected as
the setup menu item No.008 (DISPLAY SEL)
setting.
O
When “R/TTL” is selected, the total tape length
is not displayed if “TIME” has been selected as
the setup menu item No.008 (DISPLAY SEL)
setting.
is not displayed if “TIME” has been selected as
the setup menu item No.008 (DISPLAY SEL)
setting.
008
DISPLAY SEL
This selects what information is to be
provided by the time code and other super
displays output to the VIDEO OUT 3/SDI OUT 3
connector.
provided by the time code and other super
displays output to the VIDEO OUT 3/SDI OUT 3
connector.
0000
TIME : Data only.
(The data indicates the value for whichever of
CTL, TC or UB currently selected by the
COUNTER button.)
CTL, TC or UB currently selected by the
COUNTER button.)
0001
T&STA : Data and operation status.
0002 T&S&M : Data, operation status and
mode.
0003
T&RT : Data and REC TIME
0004 T&YMD :
Data and REC DATE (year/month/day)
0005 T&MDY :
Data and REC DATE (month/day/year)
0006 T&DMY :
Data and REC DATE (day/month/year)
0007
T&UB :
Data and user’s bit.
However, when UB has been selected with the
COUNTER button, the time code is displayed
after the user’s bit.
However, when UB has been selected with the
COUNTER button, the time code is displayed
after the user’s bit.
0008
T&CTL :
Data and CTL data.
However, when CTL has been selected with
the COUNTER button, the time code is
displayed after the CTL data.
However, when CTL has been selected with
the COUNTER button, the time code is
displayed after the CTL data.
0009
T&T :
Data and time code.
0010
VITC:
The time code and user’s bit recorded in the
VAUX area are displayed.
VAUX area are displayed.
<Notes>
O
Mode display:
DVCPRO 50 (50 Mbps) = DVCPRO_50,
DVCPRO (25 Mbps) = DVCPRO,
DV = DV, DVCAM = DVCAM
DVCPRO 50 (50 Mbps) = DVCPRO_50,
DVCPRO (25 Mbps) = DVCPRO,
DV = DV, DVCAM = DVCAM
O
An error message appears if a warning or error
has occurred when “T&S&M” has been
selected as this setting.
has occurred when “T&S&M” has been
selected as this setting.
O
REC TIME and REC DATE are displayed
during DV/DVCAM, playback only. With the
DVCPRO50 (50 Mbps) or DVCPRO (25 Mbps)
format, the operating mode is displayed.
during DV/DVCAM, playback only. With the
DVCPRO50 (50 Mbps) or DVCPRO (25 Mbps)
format, the operating mode is displayed.
No./Item
Description
<Note>
When the automatic editing
mode [PREVIEW, AUTO EDIT]
is set, the unit will not operate if
the preroll time is set to 0
seconds.
When the automatic editing
mode [PREVIEW, AUTO EDIT]
is set, the unit will not operate if
the preroll time is set to 0
seconds.