McCulloch 96071002300 Owner's Manual

5

0

2530

0

2

5

31

1.  Remove and discard the upper bolt on both sides of 

the drawbar. Using the same holes, install the shoulder 
bolts supplied and tighten securely.

2.  Install adapter to both sides of support assembly as 

shown.

Determine which type drawbar you have on your tractor.

Compare the drawbar illustrations below to the drawbar 
located at the rear of your tractor.

Follow the support assembly instructions that apply to your 
type drawbar.

3.  Align support assembly pin with hole in drawbar and 

hang assembly over the shoulder bolts.

4.  Be sure support assembly is seated properly and secure 

with retainer spring supplied.

1.  Discard adapters provided - not required for drawbar 

type B.

2.  Align support assembly pin with hole in drawbar and 

hang assembly over the shoulder bolts.

3.  Be sure support assembly is seated properly and secure 

with retainer spring supplied.

3064