ALTINEX MT115-111 User Manual

400-0443-004

19

All Menu Mode examples assume an 
MT115-111 is installed in slot 4 of unit ID 1.

NOTE: The communication software you use 

may echo each character as it is typed 
when entering numeric values (not 
selecting menu items). For example, 
entering a value of 03 may appear as 
0033 on the screen.

Follow the keystrokes below to set the video 
equalization for Input 1 to 16 with a starting level 
of 12.

Enter

List available systems

1

Select unit ID 1

04

Select MT115-111 in slot 4

1

Select EQUALIZATION CONTROL

1

Select INPUT #1 for adjustment

1111

Select increment 4 times

ESC

Return to EQUALIZATION Menu

ESC

Return to the Main Menu

Start from the MT115-111’s  Main Menu and
follow the keystrokes below.

6

Display card status

NOTE:

The status will be displayed, followed 
by the Main Menu being redisplayed.

We have carefully tested and found no problems in 
the supplied MT115-111 unit. However, we would 
like to offer the following suggestions:

Solution 1: Make sure the card is plugged all 

the way into the enclosure. If an 
LED is still not on, see Cause 2.

Solution 1: Turn the system power off and then 

back on again. If one of the LEDs is 
still not on, please call ALTINEX at 
(714) 990-2300.

Set the gain control to 4 using the 
RS-232 commands in Section 7.2.  If 
the display is still too bright, see 
Cause 2.

Set the  gain control switch to the 
HW (hardware) position for a fixed 
gain of one. If the display is still too 
bright, see Cause 3.

Set the gain control switch to the 
HW (hardware) position for a fixed 
gain of one. If the display is still too 
bright, please call ALTINEX at 
(714) 990-2300.