Panasonic CY-BT100U User Manual
English
21
Advanced Operation
❑ Calling back
A call-back call can be made.
However, the callback function is disabled after disconnecting
Bluetooth communication. (e.g. communication disconnection
between the Bluetooth unit and mobile phone, and communica-
tion disconnection by turning off the power of the Head unit)
However, the callback function is disabled after disconnecting
Bluetooth communication. (e.g. communication disconnection
between the Bluetooth unit and mobile phone, and communica-
tion disconnection by turning off the power of the Head unit)
Step 1
Press the
[Hang-on] after a call comes in.
Step 2
Confirm the telephone number on the Head unit.
Step 3
Press the
[Hang-on] to make a call.
(Press
[Hang-up] to activate cancellation.)
Note: Some mobile phones cannot display the telephone num-
ber of an incoming call or call back.
ber of an incoming call or call back.
❑ Rejection of incoming calls
Press the
[Hang-up] to reject an incoming call.
❑ Disconnection of Bluetooth
You can disconnect Bluetooth temporarily.
Disconnection
Press and hold the
[Hang-up]. for more than 2 seconds
until the indicator putting out (approximately 2 seconds ) to
reject call on this unit.
reject call on this unit.
Reconnection
Press
[Hang-on]. The LED turns from blinking to perma-
nent.
Note: You cannot disconnect Bluetooth in the talking state but
end a call.
end a call.