Yamaha AVENTAGE RX-A1020 User Manual
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
111
Function
Configures the functions that make the unit easier to use.
■
Input Assignment
Assigns the COMPONENT VIDEO, COAXIAL and OPTICAL jacks to another input
source.
source.
■
Procedure
Example: assigning the OPTICAL (e) jack to the input source “AV 2”
1
Use the cursor keys to select the cell at the intersection of “AV 2” and “Optical”,
and press ENTER.
and press ENTER.
2
Use the cursor keys to select “e” and press ENTER.
3
To exit from the menu, press ON SCREEN.
• You cannot assign both COAXIAL and OPTICAL jacks to the same input source.
■
Display Set
Configures the settings related to the front display and TV screen display.
❑ Dimmer (Front Display)
Adjusts the brightness of the front display.
Setting range
-4 to 0 (higher to brighten)
Default
0
• The front display may become dark when “ECO Mode” (p.113) is set to “On”.
❑ Short Message
Selects whether to display short messages on the TV screen when the unit is operated
(such as input selection and volume adjustment).
(such as input selection and volume adjustment).
Settings
❑ Wall Paper
Selects the image to be used as wallpaper on the TV.
Settings
On (default)
Displays short messages on the TV screen.
Off
Does not display short messages on the TV screen.
Picture 1 (default),
Picture 2, Picture 3
Picture 2, Picture 3
Displays the selected image on the TV screen when there is no video
signal.
signal.
Gray
Displays a gray background on the TV screen when there is no video
signal.
signal.