Yamaha AVENTAGE RX-A1020 User Manual

CONFIGURATIONS

➤ Controlling external devices with the remote control

En

You can use the unit’s remote control to operate external devices 
(such as BD/DVD players) if you have registered the remote control 
code of the external device.

• You cannot control an external device that does not have a remote control sensor.

• Ensure that the remote control ID of the external device is set to “ID1”. If any other 

ID is selected, the remote control operations may not work properly.

• If the unit’s remote control is without batteries for more than 2 minutes, the 

registered codes may be cleared. If this happens, insert new batteries and register 
the codes again.

• Under the unit’s default settings, the amplifier code (Yamaha: 5098) is set for all 

the input selection keys. With this setting, you can control HDMI 
Control-compatible devices connected to the unit with the remote control. (This 
function may not work depending on the specification of the external device.)

You can use the unit’s remote control to operate a TV if you have 
registered its remote control code.

• You can also register your TV’s remote control code to the unit’s input selection 

keys (p.120). This would allow you to use the cursor keys or numeric keys to 
operate the TV (this function may not be available on some TV models).

• (China, Korea, U.K. and Europe models only)

You can also assign a function to each key using the learning function (p.121).

• If there are multiple remote control codes, register the first code in the list. 

If that does not work, try the other codes.

SOURCE blinks twice.

Perform each of the following steps within 1 minute. 
Otherwise, the setting will be canceled. If this happens, 
repeat from Step 2.

Press TV z.

Once the remote control code is successfully registered, SOURCE 
blinks twice.

If it blinks six times, registration has failed. Repeat from Step 2.

■

Once you have registered the remote control code for your TV, you 
can control it using the TV operation keys, regardless of the input 
source selected on the unit.

TV operation keys

INPUT

Switches the video inputs of the TV.

MUTE

Mutes the audio output of the TV.

TV VOL

Adjust the volume of the TV.

TV CH

Switch the channels of the TV.

TV z

Turns on/off the TV.

z