Sony CDX-GT225C User Manual

Page of 100
18
Error displays/Messages
If these solutions do not help improve the situation, 
consult your nearest Sony dealer.
If you take the unit to be repaired because of CD 
playback trouble, bring the disc that was used at the 
time the problem began.
An FM program broadcast in stereo is heard in 
monaural.
The unit is in monaural reception mode.
t Set “MONO-OFF” (page 11).
RDS
The SEEK starts after a few seconds of 
listening.
The station is non-TP or has weak signal.
t Deactivate TA (page 9).
No traffic announcements.
• Activate TA (page 9).
• The station does not broadcast any traffic 
announcements despite being TP.
t Tune in another station.
PTY displays “- - - - - - - -.”
• The current station is not an RDS station.
• RDS data has not been received.
• The station does not specify the program type.
CDX-GT225C/GT222/GT220 only
ERROR
• The disc is dirty or inserted upside down.
t Clean or insert the disc correctly.
• A blank disc has been inserted.
• The disc cannot play due to a problem.
t Insert another disc.
FAILURE
The connection of speakers/amplifiers is incorrect.
t See the installation/connections manual of this 
model to check the connection.
LOAD
The unit is loading the disc.
t Wait until loading is complete.
L. SEEK +/–
The local seek mode is on during automatic tuning.
NO AF
There is no alternative frequency for the current 
station.
t Press (SEEK) –/+ while the program service name 
is flashing. The unit starts searching for another 
frequency with the same PI (Program 
Identification) data (“PI SEEK” appears).
NO INFO (CDX-GT225C/GT222/GT220 only)
Text information is not written in the MP3/WMA file.
NO MUSIC
The disc does not contain a music file.
t Insert a music CD in this unit.
NO NAME
A disc/track name is not written in the track.
NO TP
The unit will continue searching for available TP 
stations.
OFFSET
There may be an internal malfunction.
t Check the connection. If the error indication 
remains on in the display, consult your nearest 
Sony dealer.
PUSH EJT
The disc cannot be ejected.
t Press Z (eject) (page 6).
READ
The unit is reading all track and album information on 
the disc.
t Wait until reading is complete and playback starts 
automatically. Depending on the disc structure, it 
may take more than a minute.
” or “
During reverse or fast-forward, you have reached the 
beginning or the end of the disc and you cannot go any 
further.
The character cannot be displayed with the unit.