Euro-Pro SM200 User Manual

www.sharkclean.com

IMPORTANT: Always make sure the mop 
is UNPLUGGED from the wall when not in 
use. Never fill the mop, attach the mop head, 
or change or remove the Sonic Lift

™

 cleaning 

pad when the mop is plugged into the wall. To 
prolong the life of your Shark

 Sonic Steam 

 Mop, we recommend using distilled 

water. Make sure you only add water to the 
tank. The addition of chemicals or cleaning 
solutions may damage the appliance and could 
be unsafe for you and your family.

  Insert the mop handle into the main body of the 

steam mop (into the tube that leads to the tank). 
Push the mop handle and main body of the 
steam mop together until you hear it “click” into 
place. (Fig. 1)

  Fit one side of the Sonic Lift

™

 cleaning pad onto 

the head first, making sure that the scrubbing 
side is facing down, then using the lavender loop, 
pull the pocket over the head. Attach the hook 
and loop quick fasteners on the top of the pocket 
to secure in place. (Fig. 2)

   Snap the mop head into the mop body by lining 

up the groove on the back of the mop body with 
the groove on the back of the mop head. Push 
until you hear it “click” into place. (Fig. 3)

The Sonic Lift

™

 cleaning pad has two different 

cleaning sides. One side has nylon scrubbers to 
break up tough stains and the other side is a shaggy 
cleaning pad to lift up and lock away dirt and debris. 

SM200_11_IB_ENG_120608_1.indd   3

12-06-08   4:12 PM