Thermo Products omd-70 User Manual

GAS-FIRED OR OIL-FIRED FURNACE

DOWN FLOW & DIRECT VENT (SEALED COMBUSTION)

MODEL: OMD-70
INSTALLATION AND SERVICE MANUAL

For installation in:

1.   Manufactured Homes
2.   Modular Homes/Buildings
3.   Site Construction—Residential (Single Story Dwellings)

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or

any other appliance.

WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.

• Do not touch any electrical switch; do not use any phone in your building.
• Immediately call your gas supplier from a neighbor’s phone.
Follow the gas supplier’s instructions.
• If you cannot reach your gas supplier, call the fire department.

If the information in these instructions is not followed exactly, a fire or explosion may result

causing property damage, personal injury or loss of life.

: Improper installation, adjustment, alteration, service, or maintenance can cause injury or property

damage. Refer to this manual. For assistance or additional information consult a qualified installer, service
agency, or fuel supplier.

: Do not use this appliance if any part has been underwater. Immediately call a qualified service

technician to inspect the appliance and to replace any part of the electrical or control system that has been
underwater.

PLEASE READ THESE INSTRUCTIONS PRIOR TO INSTALLATION, INITIAL FIRING, AND BEFORE
PERFORMING ANY SERVICE OR MAINTENANCE. THESE INSTRUCTIONS MUST BE LEFT WITH THE USER
AND SHOULD BE RETAINED FOR FUTURE REFERENCE BY QUALIFIED SERVICE PERSONNEL.

THERMO

PRODUCTS,

LLC.

POST OFFICE BOX 217

NORTH

JUDSON,

46366

PHONE: (574) 896-2133

MO-467

ECN 5135-MA 100615

MADE IN USA