Shark SC505 User Manual

Concentrator Nozzle
To attach the concentrator nozzle to the 

nozzle of the unit, align the "U" arrow on 

the concentrator nozzle with the arrow 

on the appliance. (See illustration.) 

Push the attachment onto the nozzle 

until it stops against the appliance body. 

Turn in a clockwise direction 

approximately 90°. The attachment is 

now locked into position. 

Please note that bristles may 

break through thin towels.  We recommend 

that two (2) towels, laid one on top of the 

other be used. This will ensure that the 

brush bristles do not break through and 

that the towels will be sufficiently absorbent 

and retain as much dirt as possible.

: When installing the 

towels to the floor brush, ensure that the 

towels do not cover the front and the back 

of the brush. (See fig. E)

100% white terry cloth towel can be fitted 

on this brush, so as to absorb the dirt and 

protect delicate surfaces.  

Fig. B

3. Fold the towel as shown in Fig. B

1. Prepare white terry cloth towel: 

size 8” x 17” as shown in Fig. A.

2. Place the brush on top of the towel.

Fig. A

4. Fold the other side of the towel as 

shown in Fig. C.

Fig. C

CAUTION: When cleaning windows, 

always avoid any sudden changes in 

temperature to prevent glass breakage 

or cracks.

Locking
Button

Step 1: Connect one of the extension 

tubes to the hand grip on the 

flexible steam hose.  To 

attach the extension tubes 

one onto the other or 

onto the hand grip, press the 

locking button ensuring that it 

fits into the hole.  (See 

illustrations.)  To disconnect, 

repeat the operation by 

pressing the locking button 

and pulling the two sections 

apart.

Please note that the window squeegee can 

only be used with the 

hose. To attach the 

window squeegee to 

the hose, push it in until 

the squeegee locking 

button clicks in place on 

the hose.

Apply steam abundantly, 

rub with the soft spongy end, then remove 

excess water and dirt with the glass wiping 

edge.

This attachment is very useful for cleaning 

large windows, plastic material, ceramic, 

tiled or marble surfaces.
Attaching the Hose

To attach the hose concentrator 

nozzle (#12) to the hose, push it in 

until the locking button on the hose 

clicks in place with the hole on the 

hose concentrator nozzle. See 

illustration below.

To attach the hose to the nozzle of the 

unit, align the "U" arrow on the 

concentrator nozzle with the arrow on 

the appliance. (See illustration.) Push 

the hose onto the nozzle until it stops 

against the appliance body. Turn in a 

clockwise direction approximately 90°. 

The hose is now locked into position. 

Extension Tubes

Locking
Button

Angle Adapter

Fit floor brush with 

the angle adapter 

on to the extension 

tube. 

This attachment can only be used with 
either the unit concentrator nozzle or the 
hose concentrator nozzle. To attach, push 
the attachment onto the end of the 
concentrator nozzle. (See below)

Step 2: If the angle adapter is not 

attached to the floor brush, hold 

the brush with its bristles up in 

your left hand. With the angle 

adapter pointing downward, insert 

it into the hole in the back of the 

brush, then turn the angle 

adapter 180°.

Step 3: Insert the electrical power cord 

into the wall outlet.  Heating time 

is approximately 6 minutes with 

cold water.  Filling the steam 

generator with hot water will 

shorten heat up time.

The detail brushes can be used directly on 

the hose concentrator nozzle which 

attaches to the flexible hose or on the unit 

concentrator nozzle. To attach, push the 

detail brush onto the end of the 

concentrator. (See below.)

Locking
Button