Hamilton Beach 05519C User Manual

• Make sure that the cord or other

objects are
not trapped
under the fan
enclosure 
or tank.

• Is the cord routed correctly? The 

cord should
be pressed
completely
into the cord
exit notch.
Any excess
cord should
be completely
behind the
tabs in the

cord storage compartment, as 
shown above.

• Sometimes a vacuum can form in 

the tank,
especially 
if it has not
been seated
on the base
for a long
period of
time. Press
the button 
in the center

of the filler cap to relieve the vacuum.

• Apply 100% pure petroleum jelly 

to the filler cap gasket. Wipe off 
any excess.

• New filters are shipped flat and must

be “rounded” before installation.
Gently pull the filter into a round
shape, being careful not to tear it.
Once the filter is properly rounded,
install it and lower the fan enclosure
into place (as described on page 6).

840115700 Ev00.qxd  6/6/03  8:59 AM  Page 15