SVAT Electronics CLEARVU11 User Manual

now you can see

CLEARVU11

22

This menu allows you to setup 

the motion detection settings, 

including detection area and 

sensitivity, when motion is 

detected for this camera. 10 being 

the most sensitive and 1 being the 

least sensitive.

Press ENTER in Settings to call up Motion Detection Setup (as shown) for this camera. In Motion Detection Setup, 

the video area is divided into many small grids, and the area with transparent grids is the area which will be detected 

for motion. The gray grids represent the area that is not detected for motion.

Following is a brief description of the operations:

•

Numeric (CH1-CH4) - Press these buttons to select the camera.

•

▲▼◄►- Press these buttons to move the Mask window.

•

(+/-) - Press these buttons to resize the Mask window.

•

ENTER - Press this button to set/reset the area under the Mask window.

•  MODE - Press this button to set/reset the whole video area.
•

SEQ - Press this button to decrease the sensitivity, from 10 – 1, for the motion detection of this camera.    

         (10 is the most sensitive).
•

CALL -  Press this button to increase the sensitivity, from 1 – 10, for the motion detection of this camera.  

         (10 is the most sensitive).

•

SEARCH - Press this button to test the motion detection of this camera. The detected motion will be 

shown on the screen. Press this button again to stop testing.

•

ESC (MENU/ESC) - Press this button to escape from Motion Detection Setup, and return to Motion Setup. 

If the camera is covert, the video of this camera can only be viewed if the user has logged in as Administrator. Press 

ENTER or +/- to check/uncheck this item. The default setting is “–” - unchecked.

This option allows you to switch the monitor display to show just the video of this camera if certain events occur for 

this camera. There are 4 options, including Off, Motion, Alarm, Both (Motion & Alarm). Press +/- buttons to select one.