Allied International Home Security System User Manual
Camera interfaces
Hardware Installation Guide V2.0.0
42
Camera I/O connector pin assignment (12 pin):
DOLPHIN, OSCAR, MARLIN, PIKE, STINGRAY
DOLPHIN, OSCAR, MARLIN, PIKE, STINGRAY
The 12-pin camera I/O connector (DOLPHIN, OSCAR, MARLIN, PIKE,
STINGRAY) is also designed for industrial use and, in addition to providing
access to the inputs and outputs on the camera, it also provides a serial
interface for e.g. the firmware update.
STINGRAY) is also designed for industrial use and, in addition to providing
access to the inputs and outputs on the camera, it also provides a serial
interface for e.g. the firmware update.
The connector is available in straight and angled version under the following
numbers:
numbers:
Order text
Order number
PC-12P 12-Pin
HR10A-10P-12S
cable connector female
HR10A-10P-12S
cable connector female
K7600040
PC-12PW 12-Pin
HR10A-10LT-12S
angled cable connector female
HR10A-10LT-12S
angled cable connector female
K7600044
Table 10: Order numbers: I/O connector
Note
L
AVT supplies suitable I/O cables of different lengths (up to
10 m) as shown below.
10 m) as shown below.
Order text
Length
Order number
Trigger cable
12-pin HIROSE female to BNC
12-pin HIROSE female to BNC
2.0 m
E1000648
Trigger cable
12-pin HIROSE female to BNC
12-pin HIROSE female to BNC
5.0 m
E1000772
Trigger cable
12-pin HIROSE female to open end
12-pin HIROSE female to open end
2.0 m
E1000728
Trigger cable
12-pin HIROSE female to open end
12-pin HIROSE female to open end
10.0 m
E1000736
I/O cable
12-pin HIROSE female to open end
12-pin HIROSE female to open end
2.0 m
K1200191
I/O cable
12-pin HIROSE female to open end
12-pin HIROSE female to open end
3.0 m
K1200192
Table 11: Order numbers: trigger and I/O cables