Q-See Home Security System Leaflet

A. OPERATION NOTICES

：

（1）Keep away from water;

（2）Don't touch CCD with fingers,if necessary clean

and remove dust with soft cloth dipped in alcohol;

（3）If you have questions or problems,please contact Q-see tech
support at ts@dpsi-usa.com or 877-998-3440.

B. OPERATION PROCEDURES:

（1）Remove the cap cover from top of camera.

（2）Remove C converter when using CS lens.
（3）Screw on the lens.

（4）Connect the camera to a monitor or recording

device with a 75Ω coaxial cable.

（5）Connect the camera to 12V DC power transformer.

（6）Modify the focus of lens to get an excellent image

when image appears on the screen.

（7）If object does not focus properly,when modifying focal length, please
try the following

：

a Set the lens focal ring at unfixed.
b Focus on an object which is far

away from the camera.

c Adjust the lens and focal ring to focus the

object until you get a clear image.

d Tighten the lens fix screw.

INSTALLATION PRECAUTIONS

：

（1）Do not install the camera where it is aimed at a strong light.

（2）Do not install the camera in a place where temperature

goes above 60℃ (140°F),or there is high humidity or rain

（3）Do not install the camera in a place where it is subjected to vibration
or impact from other devices
（4）Cover the CCD if the camera will not be in use for a long time.

Digital Color CCD Camera

MANUAL

This camera uses a highly sensitive CCD
and full solid-state circuitry. It offers long life,
high reliablity and excellent image with anti-
burn ability. It is not subject to distortion
caused by magnetic fields. Easy to install, it
is an excellent choice for CCTV.

IR Vandal-proof Dome CCD Camera

CCTV SYSTEM

www.q-see.com

A. OPERATION NOTICES

：

（1）Keep away from water;

（2）Don't touch CCD with fingers,if necessary clean

and remove dust with soft cloth dipped in alcohol;

（3）If you have questions or problems,please contact Q-see tech
support at ts@dpsi-usa.com or 877-998-3440.

（b）One monitor system with two or more cameras：

（a）One monitor system with one camera：

C. CONNECTION

：

CAMERA

DVR

D. DRAFT

：

E. SPECIFICATIONS

：

扫描系统

同步系统

视频输出

白平衡

成像系统

像素

水平解析度

信噪比

珈玛

电子快门

最低照度

增益控制

Internal

Interlance 2:1

1.0Vp-p 750

Ω BNC

ON/OFF

0.45

1.0Vp-p 75Ω BNC

On/Off

B. OPERATION PROCEDURES:

（1）Remove the cap cover from top of camera.

（2）Remove C converter when using CS lens.
（3）Screw on the lens.

（4）Connect the camera to a monitor or recording

device with a 75Ω coaxial cable.

（5）Connect the camera to 12V DC power transformer.

（6）Modify the focus of lens to get an excellent image

when image appears on the screen.

（7）If object does not focus properly,when modifying focal length, please
try the following

：

a Set the lens focal ring at unfixed.
b Focus on an object which is far

away from the camera.

c Adjust the lens and focal ring to focus the

object until you get a clear image.

d Tighten the lens fix screw.

INSTALLATION PRECAUTIONS

：

（1）Do not install the camera where it is aimed at a strong light.

（2）Do not install the camera in a place where temperature

goes above 60℃ (140°F),or there is high humidity or rain

（3）Do not install the camera in a place where it is subjected to vibration
or impact from other devices
（4）Cover the CCD if the camera will not be in use for a long time.

Digital Color CCD Camera

MANUAL

Scanning system

Sync System

Elect Shutter time

White Balance

Image Sensor

Picture Elements

Horizontal Resolution

S/N Ratio

Gamma

Video Output

Usable Illumination

Power Supply

Lens

Power Consumption

Operating Temp

AGC

Weight

Video monitor

AC ADAPTOR

CAMERA

Video monitor

AC ADAPTOR

IR Vandal-proof Dome CCD Camera

CCTV SYSTEM

NTSC: 752 582(H)

480TVL

1/3"SONY CCD

Internal

1/50s~1/100000s

ON/OFF

0.45

3mm~9mm

160mA

625g (22oz)

-20℃

～+60℃ (-4°F to +140°F)

DC12V

≥50dB

0.5Lux/F1.2

Design and specification are subject
to change without prior notice.
Printed in Jul.2008