SVAT Electronics CV501 - 16CH User Manual

1.  Select the play button to call up the playback Menu  

or press PLAY   

  on the front of the DVR or the remote.
2.  Highlight PLAY TIME SEARCH and select using the mouse or by pressing    

  enter on the DVR or remote.
3.  Use the mouse wheel or directional keys to choose the date and time you    

  wish to view.
4.  The total time you have been recording for is listed at the bottom of the play  

  time search. START TIME is when your DVR began recording and END TIME is  
  the last time your DVR was recording. 
5.  After you have chosen the date and time you want to view, select the  

 

 to  

  view the footage or press enter on DVR or remote control.
6.  Please see above for playback controls.
7.  To exit playback, press the stop button, either on the DVR or remote control,  
  or from the bottom Pop Up Menu if using the mouse.

POWER

If the DVR experiences power loss, it will record the date and time of the rebooting.

RECORD

When the recording starts, the DVR will record the date, time and corresponding channel, as well as the 

   icon will appear 

on the channel. 

V. LOSS 

When the signal from a camera is lost, the DVR will record the date, time and corresponding channel, as well as the  

icon 

will appear on the channel. This could be caused by a bad connection or tampering with the camera.

ALARM

When an external alarm is triggered, the DVR will record the date, time and corresponding channel. The DVR will also display 

the   

icon on the channel which received the alarm until a button is pressed. 

MOTION

When the DVR detects motion, it will record the date, time, and corresponding channel. The DVR will also display the             

icon on the channel where motion was detected.

1.  Select the play button to call up the playback Menu  

or press PLAY on the  

  front of DVR or remote control.
2.  Highlight EVENT LIST SEARCH.
3.  Press ENTER or double click the left mouse button to enter the Event Search  

  menu or press the enter button on the DVR or remote control.
4.  Navigate through the event list by using the up and down directional buttons  

  or the mouse scroll wheel. 
5.  Highlight the event you want to view and press enter or double click the left  
  mouse button to view the video footage from the event.
6.  Follow the playback controls listed earlier to view your footage.
7.  To exit playback, press STOP or scroll mouse to bottom of screen and click the  
  stop button.