Panasonic panasonic hd integrated camera User Manual

The down-conversion mode is selected here.
≥ Only enabled when [Format] is [480p (576p)]*.
* When [System Frequency] is [59.94Hz(NTSC)], you can select [480p], and when it is set to 

[50Hz(PAL)], you can select [576p].

∫ Setting Using the Camera Menu

≥ When the camera menu is being displayed, [SideCut] display becomes [LetterBox] display.

You can change the system frequency.
≥ When you press [Set] after setting the option, a message confirming that you want to 

reboot the unit is displayed. Press [OK] to restart the unit.

∫ Setting Using the Camera Menu

≥ A message confirming whether you wish to restart the unit is displayed. Select [YES] to 

restart the unit.

Used when the aspect ratio of the 
monitor is 16:9. If the aspect ratio of the 
monitor is 4:3, the width of an image is 
squashed in and the image is elongated 
vertically.

Used when the monitor aspect ratio is 
4:3. Based on the vertical length, 
portions that extend off the sides of the 
screen are cut off, and the angle of view 
is adjusted.

Used when the monitor aspect ratio is 
4:3. Based on the width, the top and 
bottom of the image are blackened, and 
the angle of view is adjusted.

# [DOWN CONV. MODE] # desired setting

# [SYSTEM FREQ] # desired setting