Denon DVD-3800BDCI User Manual

13

Analog 7.1ch/5.1ch audio signals can be output from 7.1ch AUDIO OUT jacks.

After you made all necessary connections, connect the AC cord to the AC IN. Then connect the AC 
cord to the AC outlet.

Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1

• When connecting to a 2-channel audio stereo device, use the 2ch AUDIO OUT jacks. If the 7.1ch 

AUDIO OUT jacks are used, set “7.1ch Audio Out” in the “Audio” menu to “2 Channel” (Refer to 
page 33). For software recorded in multi-channel, analog signals that have been down-mixed 
into 2 channels are output. (For sources which are prohibited from down-mixing, only the FL/FR 
signals are output.)

Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.

R

L

AUDIO IN

RCA audio cable

Stereo component

R

SURROUND

L

CENTER

SUB-

WOOFER

R

SURROUND

 BACK

L

R

L

FRONT

AV amplifier

• If you connect to 5.1-channel surround system, do not connect to SBR/SBL (surround back R/L) 

jacks, then set “Surround Back” in “Speaker Configuration” to “None”.

Supplied cables used in this connection are as follows:
• AC cord x 1

• Insert the plugs securely. Incomplete connections will result in the generation of noise.

AC cord

AC 120V, 60 Hz

E5E00UD_EN.book  Page 13  Friday, January 18, 2008  6:59 PM