Panasonic KX-TG6432 Owner's Manual

Page of 64
Programming
24
For assistance, please visit http://www.panasonic.com/help
*1 If “System setting” column is checked, you do not need to program the same item 
using another handset.
*2 If you subscribe to a Caller ID service and want to view the caller’s information 
after lifting up the handset to answer a call, turn off this feature.
*3 The handset can display the Internet address where you can download the 
operating instructions or get further information for this product, using your 
computer.
*4 Turn this feature off if you prefer not to hear key tones while you are dialing or 
pressing any keys, including confirmation tones and error tones.
*5 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone 
(tone 1 to 3). If you select a melody, you cannot distinguish lines by their ringers.
*6 If you select one of the melody ringer tones, the ringer tone continues to play for 
several seconds even if the caller has already hung up. You may either hear a dial 
tone or no one on the line when you answer the call.
*7 When the ringer volume is turned off, ~ is displayed and the handset does not ring 
for outside calls.
However even when the ringer volume is set to off, the handset rings at the low 
level for alarm (page 25), intercom calls, and paging (page 39).
*8 The flash time depends on your telephone exchange or host PBX. Contact your 
PBX supplier if necessary. The setting should stay at “700ms” unless pressing 
{
FLASH} fails to pick up the waiting call.
*9 Generally, the line mode setting should not be adjusted. If S is not displayed 
when another phone connected to the same line is in use, you need to change the 
line mode to “A”.
*10This feature allows the unit to automatically adjust the date and time setting when 
caller information is received. To use this feature, set the date and time first.
Time adjust
(Caller ID 
subscribers only)
{
2}{2}{6}
{
1}: <Caller ID auto
{
0}: Manual
r
V.M. access
(V.M.: Voice mail)
{
3}{3}{0}
VM tone detect
(VM: Voice mail)
{
3}{3}{2}
{
1}: <On> {0}: Off
r
Voice prompt
(Change language)
{
1}{1}{2}
{
1}: <English
{
2}: Español
r
Feature
Feature 
code
Setting code
System 
setting
*1
Page
TG643x(e).book  Page 24  Monday, December 1, 2008  10:13 AM