Sony 530P User Manual

Page of 208
Cha
p
te
r 7  
 Men
u
 Dis
pla
y
s
 and
 Det
a
iled Se
tt
ing
s
106
7-1 Menu Organization and Operation
• OPERATION menu:
This menu contains items for changing settings according 
to conditions related to the subject when the camcorder is 
being operated.
• PAINT  menu
This menu contains items for making detailed image 
adjustments while using a waveform monitor to monitor 
the waveforms output by the camera. Support of a video 
engineer is usually required to use this menu. Although 
you can also use an external remote control panel or master 
setup unit to set the items on this menu, this menu is 
effective when using the camcorder by itself outdoors. 
• MAINTENANCE menu
This menu contains items for performing camera 
maintenance operations, such as changing the VDR 
system or using infrequently used “paint” items. 
• FILE  menu
This menu is for performing file operations, such as 
writing the reference file.
• DIAGNOSIS menu
This menu enables you to confirm the VDR status or 
identify a failed circuit board.
7-1-2 Displaying Menus
The camcorder can display menus both on the viewfinder 
screen and on the color LCD.
Displaying menus on the viewfinder screen
When the camcorder is powered on, open the cover of the 
menu operating section, and set the MENU ON/OFF 
switch to the ON position.
This displays menus on the viewfinder screen, regardless 
of the ON/OFF setting of the viewfinder DISPLAY 
switch.
Displaying menus on the color LCD
With the camcorder powered on, proceed as follows.
1
Open the cover of the menu operating section, and set 
the MENU ON/OFF switch to the ON position.
2
Set the DISP SEL switch at the lower left of the color 
LCD to CHAR.
This displays menus on the color LCD.
In the remainder of this section, the viewfinder display is 
generally shown as an example menu display, but the 
display on the color LCD is similar.
7-1-3 Basic Menu Operations
When you open the cover of the menu operating section, 
the MENU ON/OFF switch appears. If the MENU ON/
OFF switch is set to ON, the USER menu is displayed on 
the screen. Closing the cover automatically sets the MENU 
ON/OFF switch to OFF.
Controls used for the basic use of the menu oerations
Displaying the TOP menu
Hold down the MENU button, and move the MENU ON/
OFF switch from the OFF to the ON position.
Note 
Depending on the internal switch settings, display of the 
TOP menu may be disabled.
For details, refer to the Maintenance Manual.
Viewfinder
Color LCD 
DISP SEL 
switch
The MENU ON/OFF switch 
is inside the cover.
POWER switch
CANCEL/PRST / 
ESCAPE switch
MENU ON/OFF 
switch
MENU knob
Cover of the menu 
operating section