Sony 300PK User Manual

Chapter 1 Overview

Chapter 1

Overview

23

9 LENS connector (12-pin)
If you use a lens with cable, connect the lens cable.

0 VIDEO OUT connector (BNC)
This outputs the video signal captured by the
camcorder.

!¡ REMOTE connector 2 (10-pin)
Connect the optional RM-M7G Remote Control Unit
to this connector. Set the CAMERA HEAD SELECT
switch on the bottom of RM-M7G to 1.

You can also connect a remote control unit with
microphone.

EZ mode cannot be used if the RM-M7G is connected
to the camcorder.

1 Cassette holder
Power the camcorder and press the EJECT button to
open the lid. Insert the cassette and close the lid by
pressing the indication “PUSH” .

2 GEN LOCK IN (gen lock video input) connector
(BNC)
When synchronizing the camcorder to an external
signal, input a reference video signal (VBS or BS).

1

2

3

4

5

6

7

3 TC IN (time code input) connector (BNC)
Input an external signal for synchronizing the built-in
time code generator.  Use an SMPTE (DSR-300) or
EBU (DSR-300P) time code signal.

Use a jitterless LTC signal.  Using an LTC signal
reproduced by other equipment may cause the
camcorder to malfunction.