Sony CCD-TRV338 User Manual

Page of 112
Recording
26
3
Slide the POWER switch to select the 
CAMERA mode.
4
Press and hold PHOTO lightly.
You will hear a small beep sound, and the 
picture will become a still image. 
Recording does not start at this point.
5
Press PHOTO fully.
A shutter sound is heard, and the image is 
recorded with sound for 7 seconds.
The still image is displayed on the screen 
until recording is completed.
To turn the power off
Slide the POWER switch up to (CHG) OFF.
b
Note
 appears when the tape photo recording does 
not work.
z
Tip
• You can record about 510 images in the SP mode 
and about 765 images in the LP mode on a tape 
which can record for 60 minutes in the SP mode.
Recording with ease 
– Easy Handycam
With this Easy Handycam operation, most of 
the camera settings are set to automatic 
mode, only basic functions become available, 
and screen font size increases for easy 
viewing. Even first time users can enjoy easy 
recording. Before recording, follow steps 1 to 
7 in “Getting started” (p. 11 - p. 19).
z
Tip
• Buttons that do not work during Easy Handycam 
operation have a dot beside them on your camcorder. 
Also, only menu items that are available during Easy 
Handycam operation are displayed when MENU is 
pressed.
1
Remove the lens cap. Pull the lens cap 
string down and attach it to the grip 
belt.
2
Press OPEN and open the LCD panel. 
3
Slide the POWER switch to select the 
CAMERA mode.
You can record movies only.
4
Press EASY. 
EASY lights up in blue.
Slide the POWER 
switch while pressing 
the green button.
CAPTURE
60
min
The indicator appears.
REC START/STOP
EASY
POWER switch
OPEN
Camera recording lamp